Dalbello Panterra 120 ID Ski Boots

The Dalbello Panterra 120 ID Ski Boots are your key to unlocking the pleasures of the backcountry without giving up comfort or powerful downhill performance. With an adjustable last that ranges from 102 mm to 100 mm and plenty of room over the instep, the Panterra 120 can handle many high volume feet without issue, and the fully heat moldable ID liners add another level of customization potential. An easy to use hike mode locks firmly into place for the descent. **Fit** _Last: 100 - 102 mm_ – Dalbello's VVF technology gives this boot an adjustable forefoot last that can vary from 100 mm to 102 mm simply by closing the front buckle in a different notch. _Contour 4 Shell Fit_ – Contour 4 Technology is a revolutionary technological advance in performance ski boot fitting. The anatomical contours of the inside sidewalls of the boot-shell, as well as the innerboot lasts, are precisely “mapped” to the shape of the typical high performance skier’s foot. A little extra “space” is molded into the inside of the boot shell at 4 critical fit points: ankle, heel, 5th metatarsal, and navicular. **Flex** _Flex: 120_ – Stiff but not too stiff, this flex is the perfect compromise between all mountain mobility and big mountain control. **Liner** _ID Now_ – An overlapping high and soft density Intuition EVA foam liner, pre-molded to fit instantly. Thermo moldable in 6 minutes. **Shell Materials & Design** _Cabrio Design Architecture_ – Dalbello's 3 Piece Cabrio Design architecture has been the cornerstone of their performance, all mountain and freestyle models for more than a decade. This unique construction combines a 3 piece construction assembly - shell/cuff/tongue - that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello's Cabrio models provide the ultimate in responsive performance to ski your best. Cabrio Design permits the use of stiffer and more rigid plastics in the lower shell. This strengthens the support around the foot and lower leg providing quick response and precise transfer of power to the ski edges. This design also prevents the lower shell from distorting and bulging as the boot flexes, making the boot more smooth and stable at high speeds and on irregular terrain. _Irfran Polymer_ – Irfran is a high quality Polyolefin with a % mix of rubber that gives it great performance. It has a low stiffness variance between high and low temps and good rebound. It is 30% lighter than polyurethane. **Stance** _Adjustable Cuff Alignment_ – Permits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Using 5mm Hex Tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position. **Ski/Walk Mode** _Ski/Hike Mechanism_ – Lightweight and compact advanced “Hike/Ski” control combines extended range of hiking/walking motion (Hike-mode), with solid, sensitive, and powerful ski control (Ski-mode). Feature enhanced with 2 Position Flex Control. **Buckles** _Micro-Adjustable Aluminum Buckles_ – A simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization. _Dynalink Rearfoot Retention_ – Dynalink is an independently functioning heel/instep closure band assembly that secures the skier's foot in the middle and rearfoot sections of the ski boot. During boot flex, the Dynalink band does not permit the foot to slide forward or the heel to lift lifting inside the boot shell. _Inverted Forefoot Buckle_ – Forefoot closure buckle above the instep is inverted and designed to close on the top of a boot shell, not the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions. **Power Strap** _40mm Velcro Strap_ **Sole** _Replaceable ISO 5355 Alpine Soles_ _Dura-Grip™_ – Replaceable, durable high-durometer polyurethane toes & heels for extended boot sole wear. _Grip Walk Outsoles [Sold Separately]_ – Provides increased safety and improved natural roll thanks to a curved rubber sole and includes a high-profiled, slip resistant sole. _Rubber Clad Hike Sole_ – Interchangeable, replaceable, Hi Grip Rubber compound toes & heels improve grip and traction on snow, ice, and rock. High density rubber center arch clad provides additional stability and security while walking and climbing.